In short, the BP3MV13X is a “Swiss‑army knife” controller that can replace legacy PLCs, HMIs, and data loggers—all while offering an intuitive graphical interface. | Step | Action | Pro Tip | |------|--------|--------| | 1. Verify Package Contents | • Unit (mounted on a metal rack) • Power adapter (24 V DC) • 2× M12 I/O modules • Quick‑start guide • Safety & compliance documents | Snap a photo of the box and compare with the checklist—helps with warranty claims. | | 2. Mount the Device | Use the pre‑drilled 4‑hole pattern on the back panel. Align with a 30 mm spacing grid for easy future upgrades. | Tighten screws in a diagonal pattern to avoid warping the chassis. | | 3. Connect Power & Network | • Plug 24 V DC power supply into the rear terminal block. • Connect Ethernet to your LAN (or use Wi‑Fi for quick testing). | Power‑up the unit while the Ethernet cable is already plugged in; the device will automatically request an IP via DHCP. | | 4. Power‑On & Calibration | Press the power button (top‑right). The screen will display a splash, then launch the Setup Wizard . | Choose “Factory Calibration” if the unit has been stored > 30 days. It takes ~2 minutes. | | 5. Register & Update Firmware | Using the on‑screen wizard, log in to the CVS Cloud portal (free account). The system will prompt a firmware check; install any updates. | Always keep a backup of the current firmware (the wizard can export a .bin file). |